代码 1991: NOT POSSIBLE CROSS MACHINING

Type of error: B — Registered data (the program or tool data includes an error) Stopped status: I — Reset stop Clearing procedure: O — Eliminate cause -> press reset key Display colour: Red On-screen parameters (shown in parentheses): WNo., NNo., Cause Cause: During the tool path check, the system in which the crossing command was set and/or the remote system for which the crossing command was to be executed has been set to the following status: 1: The specified axis does not exist in the remote system. 2: The local system is specified as the system for which the crossing command was to be executed. 4: A crossing control command is set for the axis currently undergoing the crossing command. 16: The G110 command is set when the local system/remote system is in the modal environment that does not allow crossing control. 32: The crossing control command is set under the prohibited status of recalculation. Action: Review and correct the program.