代碼 552: PROGRAM END NOT FOUND
問題描述與安全警告
Mazak Mazatrol Matrix CNC 觸發了嚴重的 PROGRAM END NOT FOUND 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
Type of error: A — Operation (a wrong key was pressed or the machine was operated incorrectly) Stopped status: L — Operation continued Clearing procedure: S — Press clear key Display colour: Blue Cause: A machining program in which EOR precedes the end M-code (M02, M30 or M99) or the next O number (work number) was loaded. The end-of-program condition can be changed by varying the settings of the parameter (TAP27). Action: Since the machining program has already been loaded, the PROGRAM display must be called and then one of the above three end M-codes must be inserted in the program.
Source: Mazak Mazatrol Matrix — Parameter List, M-Codes, Alarm Manual (Section 3 Alarm)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Mazak Mazatrol Matrix CNC 警報
由 Mazak 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Mazatrol Matrix CNC 出現類似 552 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 714 Mazak Mazatrol Matrix CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 552.
Need a searchable reference for more Mazak Mazatrol Matrix CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026