代碼 592: ILLEGAL COMMAND RECEIVED
問題描述與安全警告
Mazak Mazatrol Matrix CNC 觸發了嚴重的 ILLEGAL COMMAND RECEIVED 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
Type of error: A — Operation (a wrong key was pressed or the machine was operated incorrectly) Stopped status: L — Operation continued Clearing procedure: S — Press clear key Display colour: Blue Cause: - The control command or file transfer command that has been requested from the host system is a nonexistent command. - The machine number that has been designated for the loading of data other than machining program data does not agree with any of the machine numbers within the NC unit. Action: - Check the details of the command message that has been sent from the host system. - Check if the machine number is the same as that registered within the NC unit (parameter DNC19).
Source: Mazak Mazatrol Matrix — Parameter List, M-Codes, Alarm Manual (Section 3 Alarm)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Mazak Mazatrol Matrix CNC 警報
由 Mazak 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Mazatrol Matrix CNC 出現類似 592 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 714 Mazak Mazatrol Matrix CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 592.
Need a searchable reference for more Mazak Mazatrol Matrix CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026