Code L01-0017: Overrun error

Details CNC received 10 bytes or more data from HOST in sp ite of DC3 (request to stop data transfer) transmission from CNC to the HOST, which terminated the communication. CNC received 10 bytes or more data from HOST during the data transmission from CNC to the HOST. Remedy  Check the software in HOST and make sure that the HOST stops transmitting data within 10 bytes after receiving DC3.  Correct the software in HOST not to transmit data su ch as a command or header to CNC during receiving a machining program. 10 User PLC Alarms (U) - "xx" in the lower 16 bits of the sub-status 1 indi cates the program No. (0x01 to 0x78(in the hexadecimal form)) - The sub-alarm No. "yy" of sub- status 1 indicates the project No. ("yy" is not displayed when the maximum number of projects is 1) (U), refer to the PLC Development Manual.