コード M01-1043: No spindle speed clamp
問題の説明と安全警告
Mitsubishi M800/M80 CNC は重大な No spindle speed clamp アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
Details When the parameter "#1146 Sclamp" has been set to "1", the constant su rface speed command (G96) was issued to the spindle which is not selected for the spindle speed clamp command (G92/G50) under Multiple spindle control II. When the parameter "#1146 Sclamp" has been set to "0", both the G96 (Const ant surface speed control ON) modal and the pindle forward or reverse rotation signal have turned ON for the spindle, on which the speed clamp command is disabled. Remedy Press the reset key and carry out the remedy below. Issue the G92/G50 command to the sp indle that is to be used for the constant surface speed control.
Source: Mitsubishi M800/M80/E80 Series Alarm/Parameter Manual (IB-1501279)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Mitsubishi M800/M80 CNC のアラームについて
Mitsubishi によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。M800/M80 CNC が M01-1043 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 722 Mitsubishi M800/M80 CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code M01-1043.
Need a searchable reference for more Mitsubishi M800/M80 CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026