代碼 M01-1043: No spindle speed clamp
問題描述與安全警告
Mitsubishi M800/M80 CNC 觸發了嚴重的 No spindle speed clamp 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
Details When the parameter "#1146 Sclamp" has been set to "1", the constant su rface speed command (G96) was issued to the spindle which is not selected for the spindle speed clamp command (G92/G50) under Multiple spindle control II. When the parameter "#1146 Sclamp" has been set to "0", both the G96 (Const ant surface speed control ON) modal and the pindle forward or reverse rotation signal have turned ON for the spindle, on which the speed clamp command is disabled. Remedy Press the reset key and carry out the remedy below. Issue the G92/G50 command to the sp indle that is to be used for the constant surface speed control.
Source: Mitsubishi M800/M80/E80 Series Alarm/Parameter Manual (IB-1501279)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Mitsubishi M800/M80 CNC 警報
由 Mitsubishi 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 M800/M80 CNC 出現類似 M01-1043 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 722 Mitsubishi M800/M80 CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code M01-1043.
Need a searchable reference for more Mitsubishi M800/M80 CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026