代碼 M03-1003: Interfere check III: time over

Details The allowable process time for interference check III has been exceeded. Remedy  Turn OFF the interfer ence check III mode.  Correct the interfering object definition. Interfere: control axis error 2001 Interference object defi- nition number Details In the interfering object definition, the IJK control axes have been set as follows:  Nonexistent axis name (an axis not set in the base axis specification parameter "#1022 axname2")  I, J and K axes belong to different part systems  Rotary axis Remedy  Correct the setting of the IJK control ax es in the interfering object definition. Interf:2 rot axes in cylinder 2002 Interference object defi- nition number Details In the interfering object definition, two or more rotary axes have been set for the cylindrical solid definition No. Remedy  Correct the solid designation and the setting of the IJK axis rotation angle in the interfering object definition. Interfere:2 rot axes in cuboid 2003 Interference object defi- nition number Details In the interfering object definition, two or more rotary axes have been set for the cuboidal solid definition No. Remedy  Correct the setting of the IJK axis rotati on angle in the interfering object definition. Interfere: rotary axis error 2004 Interference object defi- nition number Details In the interfering object definition, the IJK rotary axes have been set as follows:  Nonexistent axis name (an axis not set in the base axis specification parameter (#1022 axname2))  Linear axis  All three axes are rotary axes Remedy  Correct the setting of the IJK rotary axes in the interfering object definition. Interfere:2 rot axes object er 2005 Interference object defi- nition number Details The solid object set in the interfering object definition is unavailable as an interfering object defined with two rotary axes. Remedy  Correct the setting of the solid in the interfering object definition. Interfere:1 ro t axis object er 2006 Interference object defi- nition number Details The solid object set in the interfering object definition is unavailable as an interfering object defined with one rotary axis. Remedy  Correct the setting of the solid in the interfering object definition.