代碼 P181-000: No spindle command (Tap cycle)
問題描述與安全警告
Mitsubishi M800/M80 CNC 觸發了嚴重的 No spindle command (Tap cycle) 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
Details Spindle rotation speed (S) has not been commanded in synchronous tapping. Remedy Command the spindle rotation speed (S) in synchronous tapping. When "#8125 Check Scode in G84" is set to "1", enter the S command in the same block where the syn- chronous tapping command is issued. Synchronous tap error
Source: Mitsubishi M800/M80/E80 Series Alarm/Parameter Manual (IB-1501279)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Mitsubishi M800/M80 CNC 警報
由 Mitsubishi 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 M800/M80 CNC 出現類似 P181-000 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 722 Mitsubishi M800/M80 CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code P181-000.
Need a searchable reference for more Mitsubishi M800/M80 CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026