コード P470-000: Invalid cmd in 3D interf check
問題の説明と安全警告
Mitsubishi M800/M80 CNC は重大な Invalid cmd in 3D interf check アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
Details Any of the following commands has been giv en during 3D machine interference check. Program format switch (G188/G189) Diameter/Radius designation switch (G10.9) Remedy Before the command, correct the program or disable interference check. Use the PLC I/F method to switch the program format.
Source: Mitsubishi M800/M80/E80 Series Alarm/Parameter Manual (IB-1501279)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Mitsubishi M800/M80 CNC のアラームについて
Mitsubishi によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。M800/M80 CNC が P470-000 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 722 Mitsubishi M800/M80 CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code P470-000.
Need a searchable reference for more Mitsubishi M800/M80 CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026