Code S53-139: Safety Function Warnings
Issue Description & Safety Warning
The Mitsubishi M800/M80 CNC has triggered a critical Safety Function Warnings alarm. Immediate attention from a qualified operator or maintenance technician is required to prevent secondary damage to the equipment or spoiled parts during the manufacturing cycle. Always ensure standard safety and LOTO procedures are followed before accessing electrical cabinets.
Official Troubleshooting Steps
No feed rate command has been issued. There is no F command in the cylindrical interpolati on or polar coordinate interpolation immediately after the G95 mode is commanded. Remedy The default movement modal command at power ON is G01. This causes the machine to move without a G01 command if a movement command is issued in the program, and an alarm results. Use an F com- mand to specify the feed rate. Specify F with a thread lead command. No spec: High speed mode 3
Source: Mitsubishi M800/M80/E80 Series Alarm/Parameter Manual (IB-1501279)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
About Mitsubishi M800/M80 CNC Alarms
Mitsubishi controllers include extensive self-diagnostics that flag or halt the machine when a fault is detected. Error code S53-139 on the M800/M80 CNC identifies one specific fault condition — its documented cause and the official corrective steps are listed above, sourced from Mitsubishi's service documentation. Always confirm against the manual for your exact machine configuration and follow LOTO procedures before servicing.
Complete Alarm List: 722 Mitsubishi M800/M80 CNC codes.
Have a better solution?
Help the industrial community by sharing your repair experience for code S53-139.
Need a searchable reference for more Mitsubishi M800/M80 CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026