代码 S53-164: Safety Function Warnings
问题描述与安全警告
Mitsubishi M800/M80 CNC 触发了严重的 Safety Function Warnings 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
No compensation No. (DOO, TOO or HOO) command was given when the radius compensation (G41, G42, G43 or G46) command was iss ued. Otherwise, the compensation No. is larger than the number of sets in the specifications. H99 or D99 is commanded with the parameter "#1227 aux11/bit1" enabled when the length compensation method and radius compensation method are set to "1 " or "2" for the M system tool life management II. Remedy Add the compensation No. command to the compensation command block. Check the number of sets for the tool compensation Nos. and correct the compensation No. command to be within the number of sets. H99 and D99 commands cannot be used when the leng th compensation method and radius compensation are set to "1" or "2". Set the length compensat ion method and radius compensation method to "0". No spec:Comp input by prog G10
Source: Mitsubishi M800/M80/E80 Series Alarm/Parameter Manual (IB-1501279)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Mitsubishi M800/M80 CNC 警报
由 Mitsubishi 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 M800/M80 CNC 出现类似 S53-164 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 722 Mitsubishi M800/M80 CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code S53-164.
Need a searchable reference for more Mitsubishi M800/M80 CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026