代码 V05-0001: SLS speed error

Details During SLS observation, the command/FB speed has exceeded the safely-limited speed(*) and has not dropped below the speed limit within the SL S detection delay time (set by parameter). The screen displays the name of axis of this error. (*)Safely-limited speed = SLS speed tolerance x SLS speed override / 100 Remedy  This error can be cancelled by the safety reset signal while motor speed is under SLS limit.  If the SLS speed tolerance or SLS speed override (set by parameter) is lower than the assumption, change the parameter setting and turn OFF and ON the power.  If the SLS detection delay time (set by parameter) is shorter than the assump tion, change the parameter setting.  Check the safety ladder to make sure that SLS speed tolerance and SLS speed override are changed in a timely manner. servation Alarm (V) SLS deceleration error 0002 Axis name