代碼 Z14-000: CC-Link IE F H/W test status n1 n2

Details H/W test is completed for the CC-Link IE field network unit. Check the test result. n1: Indicates the H/W test result of slot 1 (in hexadecimal format). n2: Indicates the H/W test result of slot 2 (in hexadecimal format). 0: H/W test is normally completed or not performed 2: External self-loopback test is completed with connection error 3: External self-loopback test is completed with communication error FFFF: H/W test is underway Remedy Take the following measures according to the test result. 0: Check the communication mode. If the mode is H/W test, switch it to online, and turn OFF and ON the NC power. If a mode other than H/W test is ac tive, check the result of the other slot and take the measures. 2: Make sure the connection of Ethernet cable, or exchange the cable. And then perform the test again. If the error occurs again, exchange the H/W. 3: Exchange the Ethernet cabl e, and perform the test again. If the error occurs again, exchange the H/W. FFFF: Turn OFF and ON the NC power. If the result is unc hanged, exchange the H/W. CC-L IE F Basic(M) comm. error n1 n2