代码 A00511: Motor OverTemperature I2T

Reaction: NONE Acknowledge: NONE Cause: - Motor overloaded. - Load cycles or load steps too high. Remedy: Independently of the kind of temperature determination check: - P0604 motor temperature warning threshold - P0625 motor ambient temperature If P0601 = 0 or 1, check the following: - Check if name plate data are correct? If not perform quick commissioning. Accurate equivalent circuit data can be found by performing motor identification (P1910=1). - Check if motor weight (P0344) is reasonable. Change if neccesary. - Via P0626, P0627, P0628 the standard overtemperatures can be changed, if the motor is not a Siemens stan- dard motor. If P0601 = 2, Check the following: - Check if temperature shown in r0035 is reasonable. - Check if the sensor is a KTY84 (other sensors are not supported)