コード 10732: [Channel %1: ] Block %5 axis %2 working area limitation violated, residual distance: %6 %3<ALUN>

Parameters: %1 = Channel number %2 = Axis name, spindle number %3 = Unit of distance %4 = Block number, label|residual distance Definitions: This alarm is generated if it is determined during block preprocessing that the programmed path of the stated axis violates the working area limitation. If MD11411 $MN_ENABLE_ALARM_MASK, bit11=1, this alarm is issued instead of alarm 10730. Alarm 10732 offers an expanded diagnostics option for t he working area limitation violation. The condition for activation is t he presence of the ALUN* alarm file in the HMI. Reaction: Correction block is reorganized. Local alarm reaction. Interface signals are set. Alarm display. Remedy: a) Check NC program for correct positional data and, if necessary, make corrections. b) Check zero offsets (current frame) c) Correct working area limitation via G25/G26, or d) Correct working area limitation via setting data, or e) Deactivate working area limitation vi a SD43410 $SA_WORKAREA_MINUS_ENABLE=FALSE Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program. Diagnostics Manual (DAsl), 03/2009