代碼 10733: [Channel %1: ] Block %5 axis %2 working area limitation violated, residual distance: %6 %3<ALUN>

Parameters: %1 = Channel number %2 = Axis name, spindle number %3 = Unit of distance %4 = Block number, label|residual distance Definitions: The motion planned for the axis violates the currently active working area limitation. The alarm is activated during the preparatio n of approach or rest blocks for REPOS. This alarm is issued instead of alarm 10731 if bit11=1 in MD11411 $MN_ENABLE_ALARM_MASK. Alarm 10733 offers an expanded diagnostics option for t he working area limitation violation. The condition for activation is t he presence of the ALUN* alarm file in the HMI. Reaction: Local alarm reaction. Interface signals are set. Alarm display. Remedy: Determine the cause of the offset from the initial or target position. The REPOS command is executed at the end of an ASUB or system ASUB. See also cross reference from ASUBs. Check the currently active work offset via the current frame. Also check the external work offsets, overlaid movements ($AA_OFF), DRF and transformation components. Cancel NC program with NC reset. Program Continuation: Clear alarm with the RESET key. Restart part program