Code 10735: [Channel %1: ] Block %5 axis %2 coordinate system-specific working area limitation violated, residual distance: %6 %3<ALUN>

Parameters: %1 = Channel number %2 = Axis name, spindle number %3 = Unit of distance %4 = Block number, label|residual distance Definitions: This alarm is generated if it is determined duri ng block preparation that the programmed path of the stated axis violates the coordinate system-specific working area limitation. Reaction: Correction block is reorganized. Local alarm reaction. Interface signals are set. Alarm display. Remedy: a) Check NC program for correct positional data and, if necessary, make corrections. b) Check work offsets (current frame) c) Correct the working area limitation with WALCS1... WALCS9, or d) Correct the working area limitati on in $P_WORKAREA_CS_LIMIT_PLUS or $P_WORKAREA_CS_LIMIT_MINUS, or e) Deactivate the working area limitation with $P_WORKAREA_CS_MINUS_ENABLE =FALSE or $P_WORKAREA_CS_PLUS_ENABLE. In cases d) and e), then reactivate the group of the selected coordinate system-specific working area limitation. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.