コード 10870: [Channel %1: ] Block %2 facing axis for constant velocity not defined

Parameters: %1 = Channel number %2 = Block number, label Definitions: Constant cutting speed was selected although no trans verse axis was applied as reference axis for constant cutting speed or assigned through SCC[AX]. Constant cutting speed can be activated as follows: - Basic position G96, G961 or G962 of G group 29 during booting - Programming of G96, G961 or G962 A reference axis for G96, G961 or G962 can be applied as a transverse axis in MD20100 $MC_DIAMETER_AX_DEF or defined through the instruction SCC[AX]. Reaction: Correction block is reorganized. Local alarm reaction. Interface signals are set. Alarm display. Remedy: Please inform the authorized personnel/service department. Check MD20100 $MC_DIAMETER_AX_DEF. Before programming G 96, G961 or G962 a transverse axis must be defined as a reference axis for constant cutting speed via MD20100 $MC_DIAMETER_AX_DEF or SCC[AX]. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.