代碼 12020: [Channel %1: ] Block %2 illegal address modification

Parameters: %1 = Channel number %2 = Block number, label Definitions: Valid address types are 'IC', 'AC', 'DC', 'CIC', 'CAC ', 'ACN', 'ACP', 'CACN', 'CACP'. Not each of these address modifications can be used for each addre ss type. The Programming Guide specifies which of these can be used for the various address types. If this address modificati on is applied to address types that are not allowed, then the alarm is generated, e.g.: N10 G02 X50 Y60 I=DC(20) J30 F100 interpolation parameters with DC. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Key: Press the NC STOP key and select the functi on "Correction block" with the softkey PROGRAM CORRECT. The correction pointer is then positioned on the incorrect block. Apply non-modal address modificati ons only for permissible addresses, in accordance with the Programming Manual. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.