コード 12553: [Channel %1: ] Block %2 name %3 option/function is not active

Parameters: %1 = Channel number %2 = Block number, label %3 = Source symbol Definitions: The option (if MD10711 $MN_NC_LANGUAGE_CONFI GURATION = 1) or the NC function (if MD10711 $MN_NC_LANGUAGE_CONFIGURATION = 3) related to this language command is not active. But the name of the language command is known. Each programming of this language co mmand is rejected with this alarm. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Press the NC Stop key and select the "Compensat ion block" function by pressing the PROGRAM CORRECT softkey. The cursor position s itself on the incorrect block. - Correct the name used (in the case of a typing error). - Activate the NC function (if a language comm and of an inactive function has been programmed). - Enable the option required (if a language command of a function with a non-enabled option has been programmed). See also MD10711 $MN_NC_LANGUAGE_CONFIGURATION. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.