Code 14186: [Channel %1: ] Block %2 ISO2 mode, and toolcarrier or tool adapter are both active (identifier %3)

Parameters: %1 = Channel number %2 = Block number, label %3 = Identifier Definitions: Only relevant in ISO2 mode: An attempt has been made to activate an ISO2 offset and toolcarrier or tool adapter together. Identifier 1: ISO2 offset is active (activated in ISO2 mode) and an attempt has been made to activate an additional toolcarrier in Siemens mode. Identifier 2: A toolcarrier has been activated in Si emens mode, and a tool offset is now activated in ISO2 mode. Identifier 3: A tool is active in the adapter in Siem ens mode, and a tool offset is now activated in ISO2 mode. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. NC Stop on alarm at block end. Remedy: Correct NC block. For identifier 1: Select a Siemens o ffset before activating the toolcarrier. For identifier 2: Deactivate the toolcarri er before selecting a TLC in ISO2 mode. For identifier 3: Load a tool (T=0) or activate a tool without an adapter before selecting a TLC in ISO2 mode. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.