コード 14320: [Channel %3: ] Axis %4: handwheel %1 used twice (%2)

Parameters: %1 = Handwheel number %2 = Use %3 = Channel %4 = Axis Definitions: Informational alarm indicating that the mentioned handwheel is used twice: The second parameter provides the explanation: 1: Block with axial handwheel override for this axis cannot be executed as the handwheel for this axis performs a DRF movement 2: Block with velocity override of the pat h cannot be executed as the handwheel performs a DRF movement for this axis of the path 3: Block with contour handwheel cannot be executed as the handwheel performs a DRF movement for this axis of the path 4: PLC axis with axial handwheel override cannot be started immedi ately as the handwheel performs a DRF movement for this axis 5: The axis is a reciprocating ax is with axial handwheel override; t he reciprocating movement cannot be started immediately as the handwheel performs a DRF movement for this axis 6: The DRF movement for this axis cannot be exec uted as an axial handwheel override is active for this axis with the handwheel 7: The DRF movement for this axis cannot be ex ecuted as a velocity override of the path with the handwheel is active and the axis belongs to the path 8: The DRF movement for this axis cannot be ex ecuted as the contour handwheel is active with this handwheel and the axis belongs to the path 9: The DRF movement for this axis cannot be ex ecuted as the axis is a PLC axis with handwheel override that is active with this handwheel 10: The DRF movement for this axis cannot be exec uted as the axis is acti ve as reciprocating axis with handwheel override with this handwheel Reaction: Alarm display. Remedy: Use the handwheel for one purpose at a time only. Program Continuation: Alarm display showing cause of alarm disapp ears. No further operator action necessary. Diagnostics Manual (DAsl), 03/2009