代碼 14414: [Channel %1: ] Block %2 GEOAX function: incorrect call

Parameters: %1 = Channel number %2 = Block number, label Definitions: The parameters for calling the GEOAX(...) are incorrect. Possible causes: - Uneven number of parameters. - More than 6 parameters were specified. - A geometry axis number was programmed wh ich was less than 0 or greater than 3. - A geometry axis number was programmed more than once. - An axis identifier was programmed more than once. - An attempt was made to assign a channel axis to a geometry axis which has the same name as one of the channel axes. - An attempt was made to assign a channel axis to a geometry axis lacking IPO functionality (see MD30460 $MA_BASE_FUNCTION_MASK, Bit8). - An attempt was made to remove a geometry axis with the same name as one of the channel axes from the geometry axis grouping. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Modify part program or correction block. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.