コード 14770: [Channel %1: ] Block %2 auxiliary function programmed incorrectly

Parameters: %1 = Channel number %2 = Block number, label Definitions: The permissible number of progra mmed auxiliary functions per NC block has been exceeded or more than one auxiliary function of the same auxiliar y function group has been programmed (M and S function). In the user-defined auxiliary functions, the maximu m number of auxiliary functions per group in the NCK system settings has been defined for all auxiliary functions by means of the MD11100 $MN_AUXFU_MAXNUM_GROUP_ASSIGN (default: 1) For each user-defined auxiliary f unction to be assigned to a group, the assignment is effected through 4 channel-specific machine data. Return jump from asynchronous subprogram with M 02/M17/M30, whereby the M code is not alone in the block. This is impermissible if the asynch ronous subprogram interrupts a block with WAITE, WAITM or WAITMC. Remedy: Program M02/M17/ M30 alone in the block or replace via RET. 22010 AUXFU_ASSIGN_TYPE: type of auxiliary function, e.g. M 22000 AUXFU_ASSIGN_GROUP: required group 22020 AUXFU_ASSIGN_EXTENSION: any required extension 22030 AUXFU_ASSIGN_VALUE: function value Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Correct the part program - max. 16 auxiliary functi ons, max. 5 M functions per NC block, max. 1 auxiliary function per group. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.