コード 150204: ---- Start alarm acquisition -----

Definitions: The alarm indicates the start or restar t of alarm acquisiti on in the alarm log. If the alarm log has been configured so that it is persi stently written into the file system, a further alarm is written into the log at each new start. The alarm thus separates the individual time intervals during which alarm acquisi tion is active. The coming and going time stamps are identical, and corr espond to the time of the start/restart of the alarm acquisition. The alarm is only visible in the alarm log. Reaction: Alarm display. Remedy: The alarm can but need not be deleted as it is only visible in the alarm log. Program Continuation: Internal SINAMICS-Alarms Diagnostics Manual (DAsl), 03/2009 Message value: %1 Drive object: All objects Reaction: OFF2 Acknowledge: POWER ON Cause: An internal software error has occurred. Fault value (r0949, interpret hexadecimal): Only for internal Siemens troubleshooting. Remedy: - carry out a POWER ON (power off/on) for all components. - upgrade firmware to later version. - contact the Hotline. - replace the Control Unit.