Code 16510: [Channel %1: ] Block %2 no facing axis for diameter programming available

Parameters: %1 = Channel number %2 = Block number, label Definitions: Diameter programming has been activated although no transverse axis with diameter programming has been applied. Transverse axes can be applied with MD20100 $MC_DIAMETER_AX_DEF or MD30460 $MA_BASE_FUNCTION_MASK bit2 for diameter programming. Diameter programming can be applied through: - basic position DIAMON or DIAM90 of the G 29 group during booting - programming of DIAMON or DIAM90 - programming of DIAMONA[AX], DIAM90A[AX] or DAC, DIC, RAC, RIC Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Please inform the authorized personnel/service department. When programming DIAMON/DIAM90, a traverse axis must be configured via MD20100 $MC_DIAMETER_AX_DEF. When programming DIAMONA[AX], DIAM90A[AX] or DAC, DIC, RAC, RIC, the AX axis must be a transverse axis for diameter programmi ng configured via MD30460 $MA_BASE_FUNCTION_MASK bit2. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.