代碼 16934: [Channel %1: ] Interrupt treatment: action %2<ALNX> not possible due to stop

Parameters: %1 = Channel ID %2 = Action number/action name Diagnostics Manual (DAsl), 03/2009 Definitions: Reorg events are, e.g. abort subprogram, delete di stance to go and interrupts, axis exchange, termination of follow-up mode. Two Reorg events overlap in this situation. The 2nd Reorg event coincides with the 1st block generated by the previous ev ent. (e.g. an axis exchange is induced twice in rapid succession). Axis exchange leads to Reorg in the c hannels in which an axis is removed without preparation. This block must be stopped in the above sequence in order to prevent the interpolator buffer from overflowing. This can be achi eved by pressing the Stop or StopAll key, configuring an alarm with INTERPRETERSTOP or by decode single block. Reaction: NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm. Remedy: The program must be aborted with Reset. Program Continuation: Clear alarm with the RESET key. Restart part program