Code 16957: [Channel %1: ] Stop-Delay area is suppressed

Parameters: %1 = Channel ID Definitions: The program area (Stop-Delay area), which is br acketed by DELAYFSTON and DELAYFSTOF, could not be activated. Every stop therefore becomes effective immediately and is not delayed! This occurs every time, when braking into a stop St op-Delay area, i.e. a braking process starts before the Stop-Delay area and ends not earlier than in the Stop-Delay area. If the Stop-Delay area is entered with override 0, the Stop-Delay area can also not be activated Example: a G4 before the Stop-Delay area allows the user to reduce the override to 0. The next block in the Stop-Delay area then starts with override 0 and the alarm situation described occurs. MD11411 $MN_ENABLE_ALARM_MASK, bit 7 switches on this alarm. Reaction: Interface signals are set. Alarm display. Remedy: MD11550 $MN_STOP_MODE_MASK and language command DELAYFSTON DELAYFSTOF Program Continuation: Alarm display showing cause of alarm disapp ears. No further operator action necessary.