代碼 17160: [Channel %1: ] Block %2 no tool selected

Parameters: %1 = Channel number %2 = Block number, label Definitions: An attempt has been made to access the current tool offset data via the system variables: $P_AD [n]: Contents of the parameter (n: 1 - 25) $P_TOOL: Active D number (tool edge number) $P_TOOLL [n]: Active tool length (n: 1- 3) $P_TOOLR: Active tool radius although no tool had been selected previously. Reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display. Diagnostics Manual (DAsl), 03/2009 Remedy: Program or activate a tool offset in the NC program before using the system variables. Example: N100 G..... T5 D1... LF With the channel-specific machine data: Modify MD22550 $MC_TOOL_CHANGE_MODE New tool offset for M function Modify MD22560 $MC_TOOL_CHANGE_M_CODE M function with tool change It is established whether a tool offset is activated in the block with the T word or whether the new offset values are allowed for only when the M word for tool change occurs. Program Continuation: Clear alarm with the RESET key. Restart part program