コード 18000: [Channel %1: ] Block %2 NCK-specific protection zone %3 wrong. Error code %4

Parameters: %1 = Channel number %2 = Block number, label %3 = Number of NCK protection zone %4 = Error specification Definitions: There is an error in the definition of the protecti on zone. The error number gives the specific reason for the alarm: No.Meaning 1: Incomplete or conflicting contour definition. 2: Contour encompasses more than one surface area. 3: Tool-related protection zone is not convex. 4: If both boundaries are active in the 3rd dimens ion of the protection zone and both limits have the same value. 5: The number of the protection zone does not exist (negative number, zero or greater than the maximum number of protection zones). 6: Protection zone definition consists of more than 10 contour elements. 7: Tool-related protection zone is defined as insi de protection zone. 8: Incorrect parameter used. 9: Protection zone to be activated is not defined. 10: Incorrect modal G code used for protection zone definition. 11: Contour definition incorrect or frame activated. 12: Other, not further specified errors. Reaction: Correction block is reorganized. Interface signals are set. Alarm display. Remedy: Please inform the authorized personnel/service departmen t. Modify definition of the protection zone and check MD. Program Continuation: Clear alarm with NC ST ART or RESET key and continue the program.