代碼 201107: <location>CU: Save to CompactFlash card unsuccessful
問題描述與安全警告
Siemens SINUMERIK 840D CNC 觸發了嚴重的 <location>CU: Save to CompactFlash card unsuccessful 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
Message value: %1 Drive object: All objects Reaction: NONE Acknowledge: IMMEDIATELY SINAMICS-Alarms Cause: A data save to the CompactFlash card was not able to be successfully carried out. - CompactFlash card is defective. - CompactFlash card does not have sufficient memory space. Fault value (r0949, interpret decimal): 1: The file on the RAM was not able to be opened. 2: The file on the RAM was not able to be read. 3: A new directory was not able to be created on the CompactFlash card. 4: A new file was not able to be created on the CompactFlash card. 5: A new file was not able to be written to the CompactFlash card. Remedy: - try to save again. - use another CompactFlash card.
Source: SINUMERIK 840D sl / 840Di sl / SINAMICS S120 Diagnostics Manual (DAsl, 03/2009)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Siemens SINUMERIK 840D CNC 警報
由 Siemens 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 SINUMERIK 840D CNC 出現類似 201107 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 4014 Siemens SINUMERIK 840D CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 201107.
Need a searchable reference for more Siemens SINUMERIK 840D CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026