コード 201425: <location>Topology: Comparison serial number of a component is different

Message value: Component number: %1, Component class: %2, Differences: %3 Drive object: All objects Reaction: NONE Acknowledge: NONE Cause: The topology comparison has detected differences in the actual and target topologies in relation to one component. The serial number is different. Alarm value (r2124, interpret hexadecimal): ddccbbaa hex: cc = number of differences bb = component class aa = component number of the component Note: The component class is described in F01375. The drive system is no longer booted. In this stat e, the drive control (closed-loop) cannot be enabled. SINAMICS-Alarms Diagnostics Manual (DAsl), 03/2009 Remedy: Adapting the topologies: - change over the actual topology to match the target topology. - download the target topology that matches the actual topology (commissioning software). Re byte cc: cc = 1 --> can be acknowledged using p9904 or p9905. cc > 1 --> can be acknowledged using p9905 and can be de-activated using p9906 or p9907/p9908. Note: Under "Topology --> Topology view" the commissi oning software offers improved diagnostics capability (e.g. setpoint/actual value comparison). See also: p9904, p9905, p9906, p9907, p9908