Code 201429: <location>Topology: Comparison connection is different for more than one component

Message value: Component number: %1, Component class: %2, Connection number1: %3, Connection number2: %4 Drive object: All objects Reaction: NONE Acknowledge: NONE Cause: A topology comparison has found differences between the actual and target topology for several components. A component was connected to another connection. The different connections of a component are described in the alarm value: Alarm value (r2124, interpret hexadecimal): ddccbbaa hex: dd = connection number of the target topology cc = connection number of the actual topology bb = component class aa = component number Note: Component class and connection number are described in F01375. The drive system is no longer booted. In this stat e, the drive control (closed-loop) cannot be enabled. SINAMICS-Alarms Remedy: Adapting the topologies: - change over the actual topology to match the target topology. - download the target topology that matches the actual topology (commissioning software). Note: In the software, a Double Motor Module behaves just like two separate DRIVE-CLiQ nodes. If a Double Motor Module is re-inserted, this can result in several diffe rences in the actual topology. Under "Topology --> Topology view" the commissi oning software offers improved diagnostics capability (e.g. setpoint/actual value comparison).