Code 206260: <location>Infeed: Temperature in the line filter too high

Message value: Drive object: A_INF, S_INF Reaction: NONE Acknowledge: NONE Cause: The temperature monitoring in the line filter has responded. If the temperature remains too high during the complete monitoring time, this results in fault F06261. Note: The temperature monitoring is only av ailable for an Active Interface Module. Remedy: - check whether the line filter type set in p0220[0] ma tches the line filter that is actually connected. Ensure that the line filter specified for the inf eed being used is connected or correct the setting of the line filter type in P0220[0]. - temperature monitoring is mandatory for AIM line filt ers (refer to P0220). Ensure that the line filter temperature switch is correctly and reliably connected to input X21 of the infeed. - reduce the ambient temperature of the line filter. - reduce the load on the infeed and the filter module. - check the magnitude of the line supply voltage. - the internal fan of the filter module is defective. If required, replace the fan. - defective temperature switch of the filter module. If required, replace the filter module.