コード 206262: <location>Infeed: Temperature switch in the line filter open when powering up
問題の説明と安全警告
Siemens SINUMERIK 840D CNC は重大な <location>Infeed: Temperature switch in the line filter open when powering up アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
Message value: Drive object: A_INF, S_INF Reaction: OFF2 (OFF1) Acknowledge: IMMEDIATELY Cause: When powering up the infeed, the temperature in the line filter is too high. Powering up is prevented. Remedy: - check whether the line filter type set in p0220[0] ma tches the line filter that is actually connected. Ensure that the line filter specified for the inf eed being used is connected or correct the setting of the line filter type in P0220[0]. - temperature monitoring is mandatory for AIM line filt ers (refer to P0220). Ensure that the line filter temperature switch is correctly and reliably connected to input X21 of the infeed. - the filter temperature is too hi gh. Allow the system to cool down. - the internal fan of the filter module is defective. If required, replace the fan. - defective temperature switch of the filter module. If required, replace the filter module. SINAMICS-Alarms Diagnostics Manual (DAsl), 03/2009
Source: SINUMERIK 840D sl / 840Di sl / SINAMICS S120 Diagnostics Manual (DAsl, 03/2009)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Siemens SINUMERIK 840D CNC のアラームについて
Siemens によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。SINUMERIK 840D CNC が 206262 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 4014 Siemens SINUMERIK 840D CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 206262.
Need a searchable reference for more Siemens SINUMERIK 840D CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026