代碼 207016: <location>Drive: Motor temperature sensor fault

Message value: %1 Drive object: SERVO, VECTOR Reaction: OFF1 (NONE, OFF2, OFF3, STOP1, STOP2) Acknowledge: IMMEDIATELY SINAMICS-Alarms Diagnostics Manual (DAsl), 03/2009 Cause: An error was detected when evaluating the temperature sensor set in p0600 and p0601. Possible causes: - wire breakage or sensor not connected (KTY: R > 1630 Ohm). - measured resistance too low (PTC: R < 20 Ohm, KTY: R < 50 Ohm). Note: If alarm A07015 is present, the time in p0607 is started. If the fault is still present after this time has expired, then fault F07016 is output; however, at the earliest, 1 s after alarm A07015. Fault value (r0949, interpret decimal): For SME selected (p0601 = 10), number of the sensor channel leading to the message. See also: p0607 (Temperature sensor fault timer) Remedy: - check that the sensor is connected correctly. - check the parameterization (p0600, p0601). - induction motors: De-activate temperature sensor fault (p0607 = 0). See also: r0035, p0600, p0601, p0607, p4600, p4601, p4602, p4603, r4620