代碼 207220: <location>Drive: Master control by PLC missing

Message value: Drive object: A_INF, B_INF, S_INF, SERVO, VECTOR Reaction: A_INFEED: OFF1 (NONE, OFF2) SERVO: OFF1 (NONE, OFF2, OFF3, STOP1, STOP2) VECTOR: OFF1 (NONE, OFF2, OFF3, STOP1, STOP2) Acknowledge: IMMEDIATELY Cause: The "master control by PLC" si gnal was missing in operation. - interconnection of the binector input for "mas ter control by PLC" is incorrect (p0854). - the higher-level control has withdraw n the "master control by PLC" signal. - data transfer via the fieldbus (master/drive) was interrupted. Remedy: - check the interconnection of the binector i nput for "master control by PLC" (p0854). - check the "master control by PLC" signal and, if required, switch in. - check the data transfer via the fieldbus (master/drive). Note: If the drive should continue to operate after withdr awing "master control by PLC" then fault response must be parameterized to NONE or the message type should be parameterized as alarm.