コード 235226: <location>TM: Tracks A/B are de-activated
問題の説明と安全警告
Siemens SINUMERIK 840D CNC は重大な <location>TM: Tracks A/B are de-activated アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
Message value: Drive object: TM41 Reaction: NONE Acknowledge: NONE Cause: The output of tracks A/B of the Terminal Module 41 (TM41) has been held (frozen). The encoder emulation of the TM41 hardware is enabled (this is necessary so that no TRI state of the A/B tracks occurs). The hardware receives a setpoint of zero so that no motion occurs at the A/B tracks. Reasons for this alarm: - CI: p4420 was not interconnected (in this case, t he encoder emulation of the hardware is de-activated) - the encoder is not in the "ready" state (parking encoder or non-parameterized encoder data set). - for TM41 there is an additional fault. Remedy: - establish an interconnection from CI: p4420. - bring the encoder into the "ready" state. - remove any TM41 faults.
Source: SINUMERIK 840D sl / 840Di sl / SINAMICS S120 Diagnostics Manual (DAsl, 03/2009)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Siemens SINUMERIK 840D CNC のアラームについて
Siemens によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。SINUMERIK 840D CNC が 235226 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 4014 Siemens SINUMERIK 840D CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 235226.
Need a searchable reference for more Siemens SINUMERIK 840D CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026