コード 236820: <location>Hub DRIVE-CLiQ: Telegram error

Message value: Component number: %1, fault cause: %2 Drive object: All objects Reaction: NONE Acknowledge: IMMEDIATELY Cause: DRIVE-CLiQ communication error from Control Unit to DRIVE-CLiQ Hub Module in question. Fault value (r0949, interpret hexadecimal): yyxx hex: yy = component number, xx = fault cause xx = 01 hex = 1 dec: Checksum error (CRC error). xx = 02 hex = 2 dec: Telegram is shorter than specified in t he length byte or in the receive list. SINAMICS-Alarms xx = 03 hex = 3 dec: Telegram is longer than specified in t he length byte or in the receive list. xx = 04 hex = 4 dec: The length of the receive telegram does not match the receive list. xx = 05 hex = 5 dec: The type of the receive telegram does not match the receive list. xx = 06 hex = 6 dec: The address of the component in the telegram and in the receive list do not match. xx = 07 hex = 7 dec: A SYNC telegram is expected - but the receive telegram is not a SYNC telegram. xx = 08 hex = 8 dec: No SYNC telegram is expected - but the receive telegram is one. xx = 09 hex = 9 dec: The error bit in the receive telegram is set. xx = 10 hex = 16 dec: The receive telegram is too early. Remedy: - carry out a POWER ON. - check the electrical cabinet design and cable routing for EMC compliance - check the DRIVE-CLiQ wiring (i nterrupted cable, contacts,...). See also: p9916 (DRIVE-CLiQ data transfer error shutdown threshold slave)