代碼 250001: <location>COMM BOARD: Alarm 1

Message value: %1 Drive object: A_INF, B_INF, CU_LINK, CU_S, HUB, S_INF, SERVO, TB30, TM15, TM15DI_DO, TM17, TM31, TM41, TM54F_MA, TM54F_SL, VECTOR Reaction: NONE Acknowledge: NONE SINAMICS-Alarms Diagnostics Manual (DAsl), 03/2009 Cause: CBE20: A PROFINET controller attempts to establis h a connection using an incorrect configuring telegram. The PROFINET version (V2.1/V2.2) of the project (HW Config) is not compatible with the CBE20 firmware. Remedy: CBE20: Upgrade the PROFINET version of the project (HW Config) and/or the CBE20 firmware to make them compatible. See also: p8835 (CBE20 firmware selection) Drives alarms Definitions: For PROFIdrive only: A problem occured during the non-cyclic communicati on with the logical start address. The additional information defines the location of the problem. If the logical start address 0 is output, only the additional information is relevant. Reaction: Alarm display. Warning display. Remedy: Please inform the authorized personnel/service department. The alarm can be suppressed with MD11411 $MN_ENABLE_ALARM_MASK bit 1 == 0 Program Continuation: Clear alarm with the Delete key or NC START.