代碼 25001: Axis %1 hardware fault of passive encoder

Parameters: %1 = Axis name, spindle number Definitions: The signals from the currently inacti ve position actual value encoder ar e missing, or they are not of the same phase, or they exhibit grounding/short-circuit. For PROFIdrive only: MD36310 $MA_ENC_ZERO_MONITORING >100 replaces the existing PowerOn alarm by the Reset alarm 25011. MD36310 $MA_ENC_ZERO_MONITORING >100 replaces the existing Reset alarm by the Cancel alarm 25011. Reaction: Alarm display. Remedy: Please inform the authorized personnel/service depar tment. Check measuring circuit connectors for correct contacting. Check encoder si gnals and replace the encoder if faults are found. Switch off monitoring with the corresponding inte rface signal DB31,... DBX1.5 / 1. 6 = 0 (Position measuring system 1/2 ). Monitoring can be switched off by setting MD36310 $MA_ENC_ZERO_MONITORING[n] to 100 (n = encoder number: 1,2). Program Continuation: Clear alarm with the RESET key. Restart part program