コード 27091: Error in data cross check NCK-PLC, stop of %1
問題の説明と安全警告
Siemens SINUMERIK 840D CNC は重大な Error in data cross check NCK-PLC, stop of %1 アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
Parameters: %1 = Extension indicating the monitoring channel that triggered the stop Definitions: The monitoring channel specified in %1 (NCK or PLC) has triggered a stop D or E (depending on the parameterization in MD $MN_SAFE_SPL_STOP_MODE ). The alarm 27090 provides further information about the cause for the stop D/E. Reaction: Alarm display. Trigger a STOP D/E (settable via MD $MN_SPL_STOP_ MODE) on all axes with safety functionality, as soon as the SPL start-up phase (MD $MN_PREVENT_SYNACT_LOCK[0,1] unequal to 0) is completed. Remedy: Evaluate the alarm parameters of alarm 27090 and am end the SPL, or check the I/O modules/wiring or the internal SPL interfaces to the sa fety monitoring channels in the NCK and drive SIMODRIVE611D. Program Continuation: Clear alarm with the RESET key. Restart part program
Source: SINUMERIK 840D sl / 840Di sl / SINAMICS S120 Diagnostics Manual (DAsl, 03/2009)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Siemens SINUMERIK 840D CNC のアラームについて
Siemens によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。SINUMERIK 840D CNC が 27091 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 4014 Siemens SINUMERIK 840D CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 27091.
Need a searchable reference for more Siemens SINUMERIK 840D CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026