コード 380050: PROFIBUS/PROFINET: Multiple assignment of inputs on address %1

Parameters: %1 = Logical address Drives alarms Definitions: Multiple assignments of input data have been detect ed in the logical address space. Logical address: Base address of the address area defined several times Reaction: Channel not ready. NC Start disable in this channel. Interface signals are set. Alarm display. Remedy: The address partitioning should be checked as follows: Check for multiple assignments in the following machine data: - MD13050 $MN_DRIVE_LOGIC_ADDRESS[0] - MD13050 $MN_DRIVE_LOGIC_ADDRESS[n-1]: n = highest axis index on control system - MD12970 $MN_PLC_DIG_IN_LOGIC_ADDRESS, MD12971 $MN_PLC_DIG_IN_NUM: PLC address area for digital inputs - MD12978 $MN_PLC_ANA_IN_LOGIC_ADDRESS, MD12979 $MN_PLC_ANA_IN_NUM: PLC address area for analog inputs If no inconsistencies can be found in the parameters, compare these machine data with the configuration in SDB (STEP 7 project). In particular, chec k that the lengths configur ed for the individual slots do not result in area overlaps. When you find the c ause of the error, change the machine data and/or SDB. Program Continuation: Switch control OFF - ON.