代碼 380072: PROFIBUS/PROFINET: Output slot for basic address %1 (size %2) not allowed

Parameters: %1 = Logical base address of the requested area %2 = Size of the area in bytes Definitions: An incorrect logical base address was set for a digi tal or analog output, the area is resides in the access range of the PLC (PIQ, base addresses < 256). For length =1 it is a digital output, For length =2 it is an analog output. Reaction: Channel not ready. NC Start disable in this channel. Interface signals are set. Alarm display. Drives alarms Remedy: Only use addresses outside the PLC proces s image (e.g. >= 256) for output slots. Enter correct basic addresses in the machine data: - For length=1: Correct machine data MN_HW_ASSIGN_DIG_FASTOUT. - For length=2: Correct machine data MN_HW_ASSIGN_ANA_FASTOUT. - NCK restart If the error cannot be eliminated by this procedure, please make a note of the error text and contact the control system manufacturer. Program Continuation: Switch control OFF - ON.