Code 4019: Axis container %1 advance not allowed with current status of NCU %2

Parameters: %1 = NCU number %2 = Axis container number Definitions: This error only occurs with dire ct advancing of the container. With direct container advancing, only one channel is allowed to activate the NC language co mmand for advancing the container. In order to ensure this, the other channels must have the reset status and the axes must be stationary. With NCU link, the above condition appli es to all channels of the NCU group. Error parameters: - 1: NC Ready missing - 16: At least one other channel is active - 35: AXCT axis is active following axis/spindle - 36: AXCT axis is active leading axis - 39: Axis/spindle disable active - 40: Overlaid motion active for AXCT axis - 41: Axis exchange active for AXCT axis - 42: Interpolator active for one axis container axis - 46: Rotating spindle with different Ipo cycle of NCUs - 47: New-Config active Reaction: Interpreter stop NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm. Remedy: The program must be canceled with Reset and the ze ro offset deselected before activating the axis container switch. Program Continuation: Clear alarm with the RESET key. Restart part program