コード 4150: [Channel %1: ] Invalid M function subprogram call configured

Parameters: %1 = Channel number Definitions: MD10715 $MN_M_NO_FCT_CYCLE[n] or MD10718 $MN_M_NO_FCT_CYCLE_PAR contains invalid configuration data: An M function, which is occupied by the system and cannot be replaced by a subprogram call has been specified in MD10715 $MN_M_NO_FCT_CYCLE[n] for the configuration of the subprogram call via M function: - M0 to M5, - M17, M30, - M19, M40 to M45, - M function for selecting spindle/axis mode according to MD20094 $MC_SPIND_RIGID_TAPPING_M_NR (default: M70), - M functions for nibbling/punching as confi gured in MD26008 $MC_NIBBLE_PUNCH_CODE if activated by MD26012 $MC_PUNCHNIB_ACTIVATION. - Also M96 to M99 for applied external language (MD18800 $MN_MM_EXTERN_LANGUAGE). MD10718 $MN_M_NO_FCT_CYCLE_PAR contains an invalid array index of MD10715 $MN_M_NO_FCT_CYCLE[n]. Currently, the values 0 to 9 are permissible. The affected machine data is reset to the default value -1. This deactivates the function. Reaction: Mode group not ready. Channel not ready. NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm. Remedy: Configure an M function in MD10715 $MN_M_NO_FCT_CYCLE[n] that is not occupied by the system, or configure a permissible array index in MD10718 $MN_M_NO_FCT_CYCLE_PAR. Program Continuation: Switch control OFF - ON.