代碼 4200: [Channel %1: ] Geometry axis %2 must not be declared a rotary axis

Parameters: %1 = Channel number %2 = Axis name Definitions: The geometry axes represent a Cartesian coordinate system and therefore the declaration of a geometry axis as rotary axis leads to a definition conflict. Reaction: NC not ready. Mode group not ready, also effective for single axes NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm. Remedy: Please inform the authorized personnel/service department. Remove rotary axis declara tion for this machine axis. For this purpose, the geometry axis index for the displayed geomet ry axis must be determined by means of MD20060 $MC_AXCONF_GEOAX_NAME_TAB. The channel axis number is stored with the same index in MD20050 $MC_AXCONF_GE OAX_ASSIGN_TAB. The channel axis number minus 1 provides the channel axis index under wh ich the machine axis number is found in MD20070 $MC_AXCONF_MACHAX_USED. Program Continuation: Switch control OFF - ON.