Code 6000: Memory reorganized using standard machine data

Definitions: The memory management was not able to allocate the NC user memory with the values in the machine data. It did not have enough memory availabl e because the total memory available is provided as dynamic and static memory for the NC user (e.g. for macro definitions, user variables, number of tool offsets, number of directories and files etc.). Reaction: NC not ready. Mode group not ready, also effective for single axes NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm. Remedy: Redefine the NC memory structure! A specific MD for NC user memory allocation cannot be stated to be the cause of the alarm. The MD initiating the alarm therefore has to be determined on the basis of the default values in the machine data by changing the user-specific memory structure step by step. Usually, it is not just one single MD that has been set too large. Therefore it is advisable to reduce the memory area by a certain proportion in several MDs. Diagnostics Manual (DAsl), 03/2009 Program Continuation: Clear alarm with the RESET key in all channel s of this mode group. Restart part program.