代碼 6010: [Channel %1: ] Data block %2 not or not completely created, error code %3

Parameters: %1 = Channel number %2 = String (block name) %3 = Internal error code Definitions: Data management has detected an error in power-up. The specified data block may not have been created. The error number specifies the type of erro r. If the error number is >100000, then there is a fatal system error. Otherwise, the user memory range was made too small. In this case the (user) error codes have the following meaning: - Error number 1: No memory space available - Error number 2: Maximum possible number of symbols exceeded - Error number 3: Index 1 lies outside the valid value range - Error number 4: Name already exists in channel - Error number 5: Name already exists in NCK If the alarm occurs after cycle programs, macro defin itions or definitions fo r global user data (GUD) have been introduced, the machine data for the user memory configuration have been incorrectly configured. In all other cases, changes to machine data t hat are already correct lead to errors in the user memory configuration. The following block names (2nd parameter) are known in the NCK (all system and user data blocks; in general, only problems in the user data bl ocks can be remedied by user intervention): - _N_NC_OPT - System internal: option data, NCK global - _N_NC_SEA - System internal: setting data, NCK global - _N_NC_TEA - System internal: machine data, NCK global - _N_NC_CEC - System internal: 'cross error compensation' - _N_NC_PRO - System internal: protection zones, NCK global - _N_NC_GD1 - User: 1st GUD block defined by _N_SGUD_DEF, NCK global - _N_NC_GD2 - User: 2nd GUD block def ined by _N_MGUD_DEF, NCK global - _N_NC_GD3 - User: 3rd GUD block defined by _N_UGUD_DEF, NCK global - _N_NC_GD4 - User: 4th GUD block defined by _N_GUD4_DEF, NCK global - _N_NC_GD5 - User: 5th GUD block defined by _N_GUD5_DEF, NCK global - _N_NC_GD6 - User: 6th GUD block defined by _N_GUD6_DEF, NCK global - _N_NC_GD7 - User: 7th GUD block defined by _N_GUD7_DEF, NCK global - _N_NC_GD8 - User: 8th GUD block defined by _N_GUD8_DEF, NCK global - _N_NC_GD9 - User: 9th GUD block defined by _N_GUD9_DEF, NCK global - _N_NC_MAC - User: Macro definitions - _N_NC_FUN - System internal: pr edefined functions and procedures, NCK global - _N_CHc_OPT - System internal: option data, channel-specific - _N_CHc_SEA - System internal: setting data, channel-specific - _N_CHc_TEA - System internal: machine data, channel-specific - _N_CHc_PRO - System internal: protection zones, channel-specific - _N_CHc_UFR - System internal: frames, channel-specific - _N_CHc_RPA - System internal: arithmetic parameters, channel-specific - _N_CHc_GD1 - User: 1st GUD block defined by _N_SGUD_DEF, channel-specific - _N_CHc_GD2 - User: 2nd GUD block def ined by _N_MGUD_DEF, channel-specific - _N_CHc_GD3 - User: 3rd GUD block def ined by _N_UGUD_DEF, channel-specific - _N_CHc_GD4 - User: 4th GUD block defined by _N_GUD4_D EF, channel-specific - _N_CHc_GD5 - User: 5th GUD block defined by _N_GUD5_D EF, channel-specific - _N_CHc_GD6 - User: 6th GUD block defined by _N_GUD6_D EF, channel-specific - _N_CHc_GD7 - User: 7th GUD block defined by _N_GUD7_D EF, channel-specific - _N_CHc_GD8 - User: 8th GUD block defined by _N_GUD8_D EF, channel-specific - _N_CHc_GD9 - User: 9th GUD block defined by _N_GUD9_D EF, channel-specific - _N_AXa_OPT - System internal: option data, axial - _N_AXa_SEA - System internal: setting data, axial - _N_AXa_TEA - System internal: machine data, axial - _N_AXa_EEC - System internal: leadscrew error compensation data, axial - _N_AXa_QEC - System internal: quadr ant error compensation data, axial - _N_TOt_TOC - System internal: toolholder data, TOA-specific - _N_TOt_TOA - System internal: tool data, TOA-specific - _N_TOt_TMA - System inter nal: magazine data, TOA-specific - _N_NC_KIN - System internal: data to describe kinematic chains, NCK-specific - _N_NC_NPA - System internal: data to describe 3D protection zones, NCK-specific - _N_NC_WAL - System internal: data to descr ibe coordinate-specific working area limitation - _N_COMPLETE_CYD - System internal: cycle and display machine data, NCK, channel, axis specific c = Channel number a = Machine axis number t = TOA unit number There are additional internal syste m data blocks with identifiers. Reaction: NC not ready. Channel not ready. NC Start disable in this channel. Interface signals are set. Alarm display. NC Stop on alarm. Remedy: Correct the machine data or undo the changes made. Please inform the authorized personnel/service depar tment. There are two determining machine data for cycle programs: - MD18170 $MN_MM_NUM_MAX_FUNC_NAMES = max. number of all cycle programs, error number = 2 shows that this value is too small. - MD18180 $MN_MM_NUM_MAX_FUNC_PARAM = max. number of all parameters defined in the cycle programs, error number = 2 show s that this value is too small (If these MDs are modified, the memory backup is retained) The following applies to macro definitions: MD18160 $MN_MM_NUM_USER_MACROS = max. number of all macro definitions, error number = 2 shows that this value is too small. (If these MDs are modified, the memory backup is retained) The following applies to GUD variables: - MD18120 $MN_MM_NUM_GUD_NAMES_NCK = max. num ber of all NCK global GUD variables, error number = 2 shows that this value is too small. - MD18130 $MN_MM_NUM_GUD_NAMES_CHAN = max. num ber of all channel-s pecific GUD variables in the channel, error number = 2 sh ows that this value is too small. - MD18150 $MN_MM_GUD_VALUES_MEM = total value me mory of all GUD variables together, error number = 1 shows that this value is too small. Program Continuation: Switch control OFF - ON.