FaultResolve
返回搜尋目錄
Search this section

Search Siemens SINUMERIK 840D CNC

Search other Siemens SINUMERIK 840D CNC alarms without going back to the model list.

Search all database
Siemens SINUMERIK 840D CNC

代碼 61188: [Channel %1: ] Block %2: No axis name agreed for rotary axis 1 -> Check commissioning of swivel CYCLE800

問題描述與安全警告

Siemens SINUMERIK 840D CNC 觸發了嚴重的 [Channel %1: ] Block %2: No axis name agreed for rotary axis 1 -> Check commissioning of swivel CYCLE800 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。

官方故障排除步驟

Parameters: %1 = Channel number %2 = Block number, label Definitions: No axis name was specified for the rotary axis 1. Alarm triggered by following cycles: CYCLE800. Remedy: Check commissioning of swivel CYCLE800. Axis name of rotary axis 1 see parameter $T C_CARR35[n] n number of swivel data record

Source: SINUMERIK 840D sl / 840Di sl / SINAMICS S120 Diagnostics Manual (DAsl, 03/2009)

Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.

關於 Siemens SINUMERIK 840D CNC 警報

由 Siemens 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 SINUMERIK 840D CNC 出現類似 61188 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。

完整警報清單: 4014 Siemens SINUMERIK 840D CNC 代碼s.

Have a better solution?

Help the industrial community by sharing your repair experience for code 61188.

Manual conversion service

Need a searchable reference for more Siemens SINUMERIK 840D CNC manuals?

We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.

Convert PDF fault-code charts and manuals into clean data.
Build public SEO pages or private internal search tools.
Prioritize updates around codes and manuals people search for.
Request manual conversion Email PDFs to manuals.errordb@gmail.com
Advertisement

Space reserved for Google AdSense / Industrial Affiliate Links

Monetization target for 2026

相關的 Siemens SINUMERIK 840D CNC 代碼

代碼 61183
[Channel %1: ] Block %2: Swivel CYCLE800: Retraction mode parameter lies outside value range: %4
代碼 61184
[Channel %1: ] Block %2: No soluti on possible with current input angle values
代碼 61185
[Channel %1: ] Block %2: Invalid angular ranges of rotary axes in swivel data record: %4
代碼 61186
[Channel %1: ] Block %2: Invalid rotary axis vectors --> Check commissioning of swivel CYCLE800
代碼 61187
[Channel %1: ] Block %2: Check start-up swivel cycle CYCLE800 --> Error code: %4
代碼 61189
[Channel %1: ] Block %2: Swivel di rect: Invalid rotary axis positions: %4
代碼 61190
[Channel %1: ] Block %2: Unable to retract prior to swiveling -> Error code: %4
代碼 61191
[Channel %1: ] Block %2: Multi-axis transformation not set up. Error code: %4
代碼 61192
[Channel %1: ] Block %2: Additional multi-axis transformations not set up. Error code: %4
代碼 61193
[Channel %1: ] Block %2: compressor option not set up